aleksei@aleksei-desktop:~$ sudo gnome-ppp
[sudo] password for aleksei:
WVCONF: /root/.wvdial.conf
GNOME PPP: STDOUT: Editing `/dev/null'.
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Scanning your serial ports for a modem.
GNOME PPP: STDOUT:
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
GNOME PPP: STDERR: ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
GNOME PPP: STDERR: ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
GNOME PPP: STDERR: ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
GNOME PPP: STDERR: Modem Port Scan<*1>: S2 S3
GNOME PPP: STDERR: WvModem<*1>: Cannot get information for serial port.
GNOME PPP: STDERR: ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
GNOME PPP: STDERR: ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
GNOME PPP: STDERR: WvModem<*1>: Cannot get information for serial port.
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
GNOME PPP: STDERR: ttyUSB1<*1>: Speed 9600: AT -- OK
GNOME PPP: STDERR: ttyUSB1<*1>: Max speed is 9600; that should be safe.
GNOME PPP: STDERR: ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
GNOME PPP: STDERR: WvModem<*1>: Cannot get information for serial port.
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
GNOME PPP: STDERR: ttyUSB2<*1>: Speed 9600: AT -- OK
GNOME PPP: STDERR: ttyUSB2<*1>: Max speed is 9600; that should be safe.
GNOME PPP: STDERR: ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
GNOME PPP: STDOUT:
GNOME PPP: STDOUT: Found a modem on /dev/ttyUSB1.
GNOME PPP: STDOUT: Modem configuration written to /dev/null.
GNOME PPP: STDERR: ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
GNOME PPP: STDERR: ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
GNOME PPP: Соединение...
GNOME PPP: STDERR: --> WvDial: Internet dialer version 1.60
GNOME PPP: STDERR: --> Cannot get information for serial port.
GNOME PPP: STDERR: --> Initializing modem.
GNOME PPP: STDERR: --> Sending: ATX3
GNOME PPP: STDERR: ATX3
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
GNOME PPP: STDERR: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
GNOME PPP: STDERR: OK
GNOME PPP: STDERR: --> Modem initialized.
GNOME PPP: STDERR: --> Sending: ATM1L3DT*99#
GNOME PPP: STDERR: --> Waiting for carrier.
GNOME PPP: STDERR: ATM1L3DT*99#
GNOME PPP: STDERR: NO CARRIER
GNOME PPP: STDERR: --> No Carrier! Trying again.
GNOME PPP: STDERR: --> Maximum Attempts Exceeded..Aborting!!
GNOME PPP: STDERR: --> Disconnecting at Tue Jan 25 07:19:13 2011
aleksei@aleksei-desktop:~$