Автор Тема: На рабочем столе не виден результат работы conky  (Прочитано 7071 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн march

  • Прохожий
  • *
  • Автор темы
  • Сообщений: 6
Здравствуйте!

Установил conky, перезагрузил. показывает окошко в течение нескольких секунд, далее, по мере загрузки рабочего стола и фонового изображения, окошко оказывается под картинкой. Попробовал убрать фоновую картинку и оставить только фон - разультат тот же.
В процессах conky есть.

Помогите!

Оффлайн HsH

  • Administrator
  • *****
  • Сообщений: 3474
по мере загрузки рабочего стола и фонового изображения, окошко оказывается под картинкой.

    Проверьте в конфиге наличие параметров
own_window yes
own_window_type override
Можно при необходимости поменять own_window_type на нужный.

Оффлайн march

  • Прохожий
  • *
  • Автор темы
  • Сообщений: 6
К сожалению, без изменений.

Вот мой файл .conkyrc

# conky configuration
# edited by darcon@gmail.com

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*



# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 2.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 1000 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 450
gap_y 1

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes
#Note: doesn't work in conky 1.2 =(

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none


# Possible variables to be used:
#
#      Variable         Arguments                  Description               

#    addr              (interface)   IP address for an interface
#    acpiacadapter                   ACPI ac adapter state.                   
#    acpifan                         ACPI fan state                           
#    acpitemp                        ACPI temperature.                       
#    adt746xcpu                      CPU temperature from therm_adt746x       
#    adt746xfan                      Fan speed from therm_adt746x             
#    alignr            (num)         Right-justify text, with space of N
#    alignc                          Align text to centre
#    battery           (num)         Remaining capasity in ACPI or APM       
#                battery. ACPI battery number can be     
#                given as argument (default is BAT0).     
#    buffers                         Amount of memory buffered               
#    cached                          Amount of memory cached                 
#    color             (color)       Change drawing color to color           
#    cpu                             CPU usage in percents                   
#    cpubar            (height)      Bar that shows CPU usage, height is     
#                bar's height in pixels                 
#    cpugraph          (height),(width) (gradient colour 1) (gradient colour 2)
#                CPU usage graph, with optional colours in hex,
#                minus the #.
#    downspeed         net           Download speed in kilobytes             
#    downspeedf        net           Download speed in kilobytes with one     
#                decimal                                 
#    downspeedgraph    net (height),(width) (gradient colour 1) (gradient colour 2)
#                Download speed graph, colours defined in
#                hex, minus the #.
#    exec              shell command Executes a shell command and displays   
#                the output in conky. warning: this     
#                takes a lot more resources than other   
#                variables. I'd recommend coding wanted   
#                behaviour in C and posting a patch :-). 
#    execbar           shell command Same as exec, except if the first value
#                return is a value between 0-100, it
#                will use that number for a bar.
#                The size for the bar is currently fixed,
#                but that may change in the future.
#    execgraph         shell command Same as execbar, but graphs values
#    execi             interval, shell command
#                 Same as exec but with specific interval.
#                Interval can't be less than             
#                update_interval in configuration.       
#   font        font      Specify a different font.  Only applies
#               to one line.
#    fs_bar            (height), (fs)Bar that shows how much space is used on
#                a file system. height is the height in   
#                pixels. fs is any file on that file     
#                system.                                 
#    fs_free           (fs)          Free space on a file system available   
#                for users.                               
#    fs_free_perc      (fs)          Free percentage of space on a file       
#                system available for users.             
#    fs_size           (fs)          File system size                         
#    fs_used           (fs)          File system used space                   
#    hr                (height)      Horizontal line, height is the height in
#                pixels                                   
#    i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                may be omitted if you have only one I2C 
#                device. type is either in (or vol)       
#                meaning voltage, fan meaning fan or
#                temp/tempf (first in C, second in F)
#                meaning temperature. n is number of the 
#                sensor. See /sys/bus/i2c/devices/ on     
#                your local computer.                     
#    if_running        (process)     if PROCESS is running, display
#                everything if_running and the matching $endif
#    if_existing       (file)        if FILE exists, display everything between
#                if_existing and the matching $endif
#    if_mounted        (mountpoint)  if MOUNTPOINT is mounted, display everything between
#                if_mounted and the matching $endif
#    else                            Text to show if any of the above are not true
#    kernel                          Kernel version                         
#    linkstatus        (interface)   Get the link status for wireless connections
#    loadavg           (1), (2), (3) System load average, 1 is for past 1     
#                minute, 2 for past 5 minutes and 3 for   
#                past 15 minutes.                         
#    machine                         Machine, i686 for example               
#    mails                           Mail count in mail spool. You can use   
#                program like fetchmail to get mails from
#                some server using your favourite         
#                protocol. See also new_mails.           
#    mem                             Amount of memory in use                 
#    membar            (height)      Bar that shows amount of memory in use   
#    memmax                          Total amount of memory                   
#    memperc                         Percentage of memory in use
#    
#    metar_ob_time
#    metar_temp
#    metar_tempf                     Temp in F
#    metar_windchill
#    metar_dew_point                 There are a bunch of these
#    metar_rh                        and they are self-explanatory
#    metar_windspeed
#    metar_winddir
#    metar_swinddir
#    metar_cloud
#    metar_u2d_time
#    
#    ml_upload_counter               total session upload in mb
#    ml_download_counter             total session download in mb
#    ml_nshared_files                number of shared files
#    ml_shared_counter               total session shared in mb, buggy
#                in some mldonkey versions
#    ml_tcp_upload_rate              tcp upload rate in kb/s
#    ml_tcp_download_rate            tcp download rate in kb/s
#    ml_udp_upload_rate              udp upload rate in kb/s
#    ml_udp_download_rate            udp download rate in kb/s
#    ml_ndownloaded_files            number of completed files
#    ml_ndownloading_files           number of downloading files
#    
#    mpd_artist         Artist in current MPD song
#                (must be enabled at compile)
#    mpd_album         Album in current MPD song
#    mpd_bar           (height)      Bar of mpd's progress
#    mpd_bitrate                     Bitrate of current song
#    mpd_status                      Playing, stopped, et cetera.
#    mpd_title         Title of current MPD song
#    mpd_vol            MPD's volume
#    mpd_elapsed                     Song's elapsed time
#    mpd_length                      Song's length
#    mpd_percent                     Percent of song's progress
#    new_mails                       Unread mail count in mail spool.         
#    nodename                        Hostname                                 
#    outlinecolor      (color)       Change outline color                     
#    pre_exec          shell command Executes a shell command one time before
#                conky displays anything and puts output
#                as text.                                 
#    processes                       Total processes (sleeping and running)   
#    running_processes               Running processes (not sleeping),       
#                requires Linux 2.6                       
#    shadecolor        (color)       Change shading color                     
#    stippled_hr       (space),      Stippled (dashed) horizontal line       
#          (height)       
#    swapbar           (height)      Bar that shows amount of swap in use     
#    swap                            Amount of swap in use                   
#    swapmax                         Total amount of swap                     
#    swapperc                        Percentage of swap in use               
#    sysname                         System name, Linux for example           
#    offset            pixels        Move text over by N pixels
#    tail              logfile, lines (interval)
#                Displays last N lines of supplied text
#                text file.  If interval is not supplied,
#                Conky assumes 2x Conky's interval.
#                Max of 30 lines.
#                Max of 30 lines can be displayed.
#    time              (format)      Local time, see man strftime to get more
#                information about format                 
#    totaldown         net           Total download, overflows at 4 GB on     
#                Linux with 32-bit arch and there doesn't
#                seem to be a way to know how many times 
#                it has already done that before conky   
#                has started.                           
#    top               type, num     This takes arguments in the form:
#                top <name> <number>
#                Basically, processes are ranked from
#                highest to lowest in terms of cpu
#                usage, which is what <num> represents.
#                The types are: "name", "pid", "cpu", and
#                "mem".
#                There can be a max of 10 processes listed.
#    top_mem           type, num     Same as top, except sorted by mem usage
#                instead of cpu
#    totalup           net           Total upload, this one too, may overflow
#    updates                         Number of updates (for debugging)       
#    upspeed           net           Upload speed in kilobytes               
#    upspeedf          net           Upload speed in kilobytes with one       
#                decimal                                 
#    upspeedgraph      net (height),(width)  (gradient colour 1) (gradient colour 2)
#                Upload speed graph, colours defined in
#                hex, minus the #.
#    uptime                          Uptime                                   
#    uptime_short                    Uptime in a shorter format               
#    
#    seti_prog                       Seti@home current progress
#    seti_progbar      (height)      Seti@home current progress bar
#    seti_credit                     Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT



${offset 240}${color slate grey}${time %a, } ${color }${time %e %B %G}
${offset 240}${color slate grey}${time %Z,    }${color }${time %H:%M:%S}
${offset 240}${color slate grey}UpTime: ${color }$uptime
${offset 240}${color slate grey}Kern:${color }$kernel
${offset 240}${color slate grey}CPU:${color } $cpu% ${acpitemp}C
${offset 240}${cpugraph 20,130 000000 ffffff}
${offset 240}${color slate grey}Load: ${color }$loadavg
${offset 240}${color slate grey}Processes: ${color }$processes 
${offset 240}${color slate grey}Running:   ${color }$running_processes

${offset 240}${color slate grey}Highest CPU:
${offset 240}${color #ddaa00} ${top name 1}${top_mem cpu 1}
${offset 240}${color lightgrey} ${top name 2}${top cpu 2}
${offset 240}${color lightgrey} ${top name 3}${top cpu 3}
${offset 240}${color lightgrey} ${top name 4}${top cpu 4}

${offset 240}${color slate grey}Highest MEM:
${offset 240}${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
${offset 240}${color lightgrey} ${top_mem name 2}${top_mem mem 2}
${offset 240}${color lightgrey} ${top_mem name 3}${top_mem mem 3}
${offset 240}${color lightgrey} ${top_mem name 4}${top_mem mem 4}

${offset 240}${color slate grey}MEM:  ${color } $memperc% $mem/$memmax
${offset 240}${membar 3,100}
${offset 240}${color slate grey}SWAP: ${color }$swapperc% $swap/$swapmax
${offset 240}${swapbar 3,100}

${offset 240}${color slate grey}ROOT:    ${color }${fs_free /}/${fs_size /}
${offset 240}${fs_bar 3,100 /}
${offset 240}${color slate grey}HOME:  ${color }${fs_free /home}/${fs_size /home}
${offset 240}${fs_bar 3,100 /home}
${offset 240}${color slate grey}SLACK:  ${color }${fs_free /mnt/slack}/${fs_size /mnt/slack}
${offset 240}${fs_bar 3,100 /mnt/slack}
${offset 240}${color slate grey}NET:
${offset 240}${color}Up: ${color }${upspeed eth0} k/s
${offset 240}${upspeedgraph eth0 20,130 000000 ffffff}
${offset 240}${color}Down: ${color }${downspeed eth0}k/s${color}
${offset 240}${downspeedgraph eth0 20,130 000000 ffffff}

${color slate grey}/var/log/messages:
${color}${exec tail -n20 /var/log/messages}


Оффлайн HsH

  • Administrator
  • *****
  • Сообщений: 3474

    Попробуйте изменить секцию на
own_window yes
own_window_class Conky
own_window_type desktop
нужно подобрать подходящий вам параметр.

Оффлайн march

  • Прохожий
  • *
  • Автор темы
  • Сообщений: 6
Спасибо, сработало. Теперь осталось подобрать прозрачность и шрифт