Автор Тема: Inxi — удобная утилита для сбора информации о системе и "железе"  (Прочитано 36550 раз)

0 Пользователей и 2 Гостей просматривают эту тему.

Оффлайн vita

  • Местный
  • *****
  • Сообщений: 974
  • Fiat lux! (Да будет Свет!)
    • Форум проекта Matuntu
calambus, говорю же, gdebi в кубунте не нужен! QApt, установленный по умолчанию, с установкой пакетов ни чуть не хуже справляется:
Лично я себе Inxi через него и ставил — тупо нажал ЛКМ по пакету, и все установилось! :)

А у меня почему-то через QApt не захотела ставиться, пришлось Gdebi-KDE устанавливать, после чего установка прошла без проблем!
Per aspera ad astra! (Через тернии к звездам!)

Оффлайн calambus

  • Местный
  • *****
  • Сообщений: 1465
  • calambus@jabber.ru
Протестировал Inxi под Debian GNU/Linux wheezy , работает без проблем ...
~$ inxi -b
Цитировать (выделенное)
System:    Host: debian-xfce4 Kernel: 3.2.0-2-686-pae i686 (32 bit) Desktop: Xfce 4.8.3 Distro: Debian GNU/Linux wheezy/sid
« Последнее редактирование: Май 14, 2012, 23:14:54 от calambus »
опыт увеличивается пропорционально количеству выведенных из строя Систем и оборудования...
Руководство по добавлению изображений на Форум

Оффлайн Лерыч

  • Постоялец
  • ***
  • Автор темы
  • Сообщений: 160
  • Выбрал Linux - включай мозг!
Протестировал Inxi под Debian GNU/Linux wheezy , работает без проблем ...
Аналогично: ~$ inxi -S
System:    Host valeron-desktop Kernel 3.0.0-1-amd64 x86_64 (64 bit) Desktop Gnome Distro Debian GNU/Linux wheezy/sid

;)
Я никогда не утверждал, что Microsoft — это Империя Зла. Я просто говорил, что они делают дерьмовые

Оффлайн vita

  • Местный
  • *****
  • Сообщений: 974
  • Fiat lux! (Да будет Свет!)
    • Форум проекта Matuntu
Ребята, а на моём системдроме  ;) в дебиане ситуация такая же, как и в Kubuntu 12.04. Пришлось устанавливать из скачанного ранее дебпакета. Работает также без проблем, но комбинации команд выдают отличные от ваших результаты:
$ inxi -b
System:    Host: vita Kernel: 2.6.32-5-686 i686 (32 bit) Desktop: Gnome 2.30.2 Distro: Debian GNU/Linux 6.0
Machine:   System: LENOVO product: 20027 version: Lenovo IdeaPad S10-2
           Mobo: LENOVO model: Mariana2 Bios: LENOVO version: 1ACN25WW(V1.16) date: 01/20/2010
CPU:       Single core Intel Atom CPU N270 (-HT-) clocked at 800.00 MHz
Graphics:  Card: Intel Mobile 945GME Express Integrated Graphics Controller
           X.Org: 1.7.7 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x600@60.0hz
           GLX Renderer: Mesa DRI Intel 945GME GEM 20091221 2009Q4 x86/MMX/SSE2 GLX Version: 1.4 Mesa 7.7.1
Network:   Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: ndiswrapper
           Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
Drives:    HDD Total Size: 120.0GB (17.3% used)
Info:      Processes: 157 Uptime: 11 min Memory: 175.7/2016.6MB Client: Shell inxi: 1.7.36
$ inxi -s
Sensors:   System Temperatures: cpu: 25.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Чем это объяснить, не знаю. Но главное, информативно!
P.s.: Чуть позднее поняла, что разница в регистре ключей. Если в верхнем регистре S, то информация о системе, если в нижнем - то sensors...
Ключ -h выдал информацию:
$ inxi -h
inxi supports the following options. You can combine them, or list them
one by one: Examples: inxi -v4 -c6 OR inxi -bDc 6
 
If you start inxi with no arguments, it will show the short form.
The following options if used without -F, -b, or -v will show just the complete line(s):
A,C,D,G,I,M,N,P,S,f,i,n,o,p,l,u,r,s,t - you can use these alone or together to show
just the line(s) you want to see.
If you use them with -v [level], -b or -F, it will show the full output for that line
along with the output for the chosen verbosity level.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output Control Options:
-A  Show Audio/sound card information.
-b  Shows basic output, short form (previously -d). Same as: inxi -v 2
-c  Available color schemes. Scheme number is required. Color selectors run a color selector option
    prior to inxi starting which lets you set the config file value for the selection.
    Supported color schemes: 0-32 Example: inxi -c 11
    Color selectors for each type display (NOTE: irc and global only show safe color set):
    94 - Console, out of X
    95 - Terminal, running in X - like xTerm
    96 - Gui IRC, running in X - like Xchat, Quassel, Konversation etc.
    97 - Console IRC running in X - like irssi in xTerm
    98 - Console IRC not in  X
    99 - Global - Overrides/removes all settings. Setting specific removes global.
-C  Show full CPU output, including per CPU clockspeed.
-d  Shows optical drive data. Same as -Dd. With -x, adds features line to output. -xx adds a few more features.
-D  Show full hard Disk info, not only model, ie: /dev/sda ST380817AS 80.0GB. See also -x and -xx.
-f  Show all cpu flags used, not just the short list. Not shown with -F to avoid spamming.
-F  Show Full output for inxi. Includes all Upper Case line letters, plus -s and -n.
    Does not show extra verbose options like -x -d -f -u -l -o -p -t -r unless you use that argument.
-G  Show Graphic card information (card, x type, resolution, glx renderer, version).
-i  Show Wan IP address, and shows local interfaces (requires ifconfig network tool). Same as -Nni
    Not shown with -F for user security reasons, you shouldn't paste your local/wan IP.
-I  Show Information: processes, uptime, memory, irc client, inxi version.
-l  Show partition labels. Default: short partition -P. For full -p output, use: -pl (or -plu).
-M  Show machine data. Motherboard, Bios, and if present, System Builder (Like Lenovo).
    Older systems/kernels without the required /sys data can use dmidecode instead, run as root.
-n  Show Advanced Network card information. Same as -Nn. Shows interface, speed, mac id, state, etc.
-N  Show Network card information. With -x, shows PCI BusID, Port number.
-o  Show unmounted partition information (includes UUID and LABEL if available).
    Shows file system type if you have file installed, if you are root OR if you have
    added to /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/bin/file (sample)
-p  Show full partition information (-P plus all other detected partitions).
-P  Show Partition information (shows what -v 4 would show, but without extra data).
    Shows, if detected: / /boot /home /tmp /usr /var. Use -p to see all mounted partitions.
-r  Show distro repository data. Currently supported repo types: APT; PACMAN; PISI; YUM.
-R  (COMING - NEW FEATURE) Show RAID data. Shows RAID devices and components, and extra data with -x/-xx
-s  Show sensors output (if sensors installed/configured): mobo/cpu/gpu temp; detected fan speeds.
    Gpu temp only for Fglrx/Nvidia drivers. Nvidia shows screen number for > 1 screens.
-S  Show System information: host name, kernel, desktop environment (if in X), distro
-t  Show processes. Requires extra options: c (cpu) m (memory) cm (cpu+memory). If followed by numbers 1-20,
    shows that number of processes for each type (default: 5; if in irc, max: 5): -t cm10
    Make sure to have no space between letters and numbers (-t cm10 -right, -t cm 10 -wrong).
-u  Show partition UUIDs. Default: short partition -P. For full -p output, use: -pu (or -plu).
-v  Script verbosity levels. Verbosity level number is required. Should not be used with -b or -F
    Supported levels: 0-7 Example: inxi -v 4
    0 - Short output, same as: inxi
    1 - Basic verbose, -S + basic CPU + -G + basic Disk + -I.
    2 - Adds networking card (-N), Machine (-M) data, and shows basic hard disk data (names only).
        Same as: inxi -b
    3 - Adds advanced CPU (-C), network (-n) data, and switches on -x advanced data option.
    4 - Adds partition size/filled data (-P) for (if present):/, /home, /var/, /boot
        Shows full disk data (-D)
    5 - Adds audio card (-A); sensors (-s), partion label (-l) and UUID (-u), short form of optical drives.
    6 - Adds full partition data (-p), unmounted partition data (-o), optical drive data (-d).
    7 - Adds network IP data (-i); triggers -xx.
-x  Show extra data (only works with verbose or line output, not short form):
    -C - bogomips on Cpu;
    -d - Adds items to features line of optical drive; adds rev version to optical drive.
    -D - Hdd temp with disk data if you have hddtemp installed, if you are root OR if you have added to
         /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)
    -G - Direct rendering status for Graphics (in X).
    -G - (for single gpu, nvidia driver) screen number gpu is running on.
    -i - Show IPv6 as well for LAN interface (IF) devices.
    -I - Show system GCC, default. With -xx, also show other installed GCC versions.
    -N -A - Adds version/port(s)/driver version (if available) for Network/Audio;
    -N -A -G - Network, audio, graphics, shows PCI Bus ID/Usb ID number of card;
    -R - Show RAID chunk size
    -S - Desktop toolkit if avaliable (GNOME/XFCE/KDE only); Kernel gcc version
    -t - Adds memory use output to cpu (-xt c), and cpu use to memory (-xt m).
-xx Show extra, extra data (only works with verbose or line output, not short form):
    -D - Adds disk serial number.
    -I - Adds other detected installed gcc versions to primary gcc output (if present).
    -M - Adds chassis information, if any data for that is available.
    -R - Adds block count and algorythm used to RAID.
    -xx -@ <11-14> - Automatically uploads debugger data tar.gz file to ftp.techpatterns.com.
-z  Adds security filters for IP addresses, Mac, and user home directory name. Default on for irc clients.
-Z  Absolute override for output filters. Useful for debugging networking issues in irc for example.
 
Additional Options:
-h --help      This help menu.
-H             This help menu, plus developer options. Do not use dev options in normal operation!
--recommends   Checks inxi application dependencies + recommends, and directories, then shows
               what package(s) you need to install to add support for that feature.
-U             Auto-update script. Note: if you installed as root, you
               must be root to update, otherwise user is fine.
-V --version   inxi version information. Prints information then exits.
 
Debugging Options:
-%  Overrides defective or corrupted data.
-@  Triggers debugger output. Requires debugging level 1-14 (8-10 - logging of data).
    Less than 8 just triggers inxi debugger output on screen.
    1-7  - On screen debugger output
    8    - Basic logging
    9    - Full file/sys info logging
    10   - Color logging.
    The following create a tar.gz file of system data, plus collecting the inxi output to file:
    To automatically upload debugger data tar.gz file to ftp.techpatterns.com: inxi -xx@ <11-14>
    For alternate ftp upload locations: Example: inxi -! ftp.yourserver.com/incoming -xx@ 14
    11 - With data file of xiin read of /sys.
    12 - With xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc.
    13 - With data from dev, disks, partitions, etc., plus xiin data file.
    14 - Everything, full data collection.

« Последнее редактирование: Май 15, 2012, 10:43:35 от vita »
Per aspera ad astra! (Через тернии к звездам!)

Оффлайн calambus

  • Местный
  • *****
  • Сообщений: 1465
  • calambus@jabber.ru
Установка тестовой Системной утилиты INXI : http://code.google.com/p/inxi/wiki/Installation
 
 * Ubuntu Based Systems - (Ubuntu, Kubuntu, LinuxMint, ...)
sudo -swget -O /etc/apt/sources.list.d/cathbard.list http://cathbard.com/files/cathbard.listapt-get update && apt-get install cathbard-keyringapt-get update && apt-get install inxi exit   
 * Debian Based Systems - (Debian, Kanotix, sidux, Canabix, ...)    
suwget -O /etc/apt/sources.list.d/cathbard.list http://cathbard.com/files/cathbard.listapt-get update && apt-get install cathbard-keyringapt-get update && apt-get install inxi exit
Лерыч вставьте этот текст в первый пост , цены нет на гражданке , этой Системной утилите ...
« Последнее редактирование: Октябрь 19, 2012, 10:18:42 от calambus »
опыт увеличивается пропорционально количеству выведенных из строя Систем и оборудования...
Руководство по добавлению изображений на Форум

Оффлайн Лерыч

  • Постоялец
  • ***
  • Автор темы
  • Сообщений: 160
  • Выбрал Linux - включай мозг!
Re: Inxi — удобная утилита для сбора информации о &
« Ответ #20 : Октябрь 20, 2012, 02:02:37 »
Лерыч вставьте этот текст в первый пост , цены нет на гражданке , этой Системной утилите ...
Сделал! :)
На Дебиановский форум тоже запостить (ну то, что Debian Based Systems касается)? ;)
« Последнее редактирование: Октябрь 20, 2012, 02:04:39 от Лерыч »
Я никогда не утверждал, что Microsoft — это Империя Зла. Я просто говорил, что они делают дерьмовые

Оффлайн calambus

  • Местный
  • *****
  • Сообщений: 1465
  • calambus@jabber.ru
Лерыч , это Ваша инициатива , а по поводу Debian-форума  - сделайте аналогично , потому как каждый раз объяснять что это такое и порядок установки - утомляет ...
При разборе неудачных полётов в Linux - дистрибутивах INXI инструмент бесценный ...
опыт увеличивается пропорционально количеству выведенных из строя Систем и оборудования...
Руководство по добавлению изображений на Форум

Оффлайн Пользователь.

  • Редактор раздела
  • *****
  • Сообщений: 4639
« Последнее редактирование: Октябрь 20, 2012, 17:17:19 от Пользователь. »

Оффлайн butjapka

  • Местный
  • *****
  • Сообщений: 1151
  • Компьютер думает так, как думает его хозяин.

Оффлайн Лерыч

  • Постоялец
  • ***
  • Автор темы
  • Сообщений: 160
  • Выбрал Linux - включай мозг!

Скачать Inxi
http://forum.runtu.org/index.php/topic,2655.msg16641.html#msg16641 :)



На Дебиановский форум тоже запостить (ну то, что Debian Based Systems касается)? ;)
Лерыч , это Ваша инициатива , а по поводу Debian-форума  - сделайте аналогично , потому как каждый раз объяснять что это такое и порядок установки - утомляет ...
Сделано! :)  calambus, спасибо за инфу!
« Последнее редактирование: Октябрь 20, 2012, 20:40:57 от Лерыч »
Я никогда не утверждал, что Microsoft — это Империя Зла. Я просто говорил, что они делают дерьмовые

Оффлайн Пользователь.

  • Редактор раздела
  • *****
  • Сообщений: 4639
Re: Inxi — удобная утилита для сбора информации о l
« Ответ #25 : Октябрь 20, 2012, 23:38:52 »
Лерыч, даже не догадывался что ты, это Valeron  ;D

А про ссылку выше, не смотрел есть ли она в теме, просто решил указать самый удобный для меня метод установки.

Даже хотел описать, как можно короче, как установить Inxi. В итоге получилась инструкция из двух слов.
« Последнее редактирование: Октябрь 21, 2012, 00:51:12 от Пользователь. »

Оффлайн Лерыч

  • Постоялец
  • ***
  • Автор темы
  • Сообщений: 160
  • Выбрал Linux - включай мозг!
Re: Inxi — удобная утилита для сбора информации о l
« Ответ #26 : Октябрь 21, 2012, 05:08:01 »
Лерыч, даже не догадывался что ты, это Valeron  ;D

Ага! Я сам часто путаюсь! ;D
Я никогда не утверждал, что Microsoft — это Империя Зла. Я просто говорил, что они делают дерьмовые

Оффлайн vita

  • Местный
  • *****
  • Сообщений: 974
  • Fiat lux! (Да будет Свет!)
    • Форум проекта Matuntu
Нашла новый репозиторий inxi:
sudo pluma /etc/apt/sources.listдобавить строки:
deb http://ppa.launchpad.net/unit193/inxi/ubuntu precise main
deb-src http://ppa.launchpad.net/unit193/inxi/ubuntu precise main
sudo apt-get update
sudo gpg --keyserver keyserver.ubuntu.com --recv 03647209B58A653A
sudo gpg --export --armor 03647209B58A653A | sudo apt-key add -
sudo apt-get update
sudo apt-get upgrade
После этих действий inxi обновилась до версии 1.9.11.

Per aspera ad astra! (Через тернии к звездам!)

Оффлайн calambus

  • Местный
  • *****
  • Сообщений: 1465
  • calambus@jabber.ru
vita , с deb http://ppa.launchpad.net/ должно быть добавление репозитория проще , как-то так :
sudo sudo add-apt-repository ppa:unit193/inxi
sudo apt-get update && sudo apt-get install inxi 
А вооще если INXI уже установлена в Системе , то проще сделать её обновление с помощью команды :
sudo inxi -U
« Последнее редактирование: Июнь 28, 2013, 22:26:44 от calambus »
опыт увеличивается пропорционально количеству выведенных из строя Систем и оборудования...
Руководство по добавлению изображений на Форум

Оффлайн vita

  • Местный
  • *****
  • Сообщений: 974
  • Fiat lux! (Да будет Свет!)
    • Форум проекта Matuntu
calambus, благодарю за полезную информацию, так действительно удобнее и проще, особенно если inxi уже установлена в системе.
Per aspera ad astra! (Через тернии к звездам!)