Ну решение простое... Так как система ставится без проблем, мы имеем загруженную графическую среду с разрешением 800х600. Так?
Но задать разрешение больше чем 800х600 мы не можем... (отсутствие выборки в настройках)
Создаем пустой файл (horg.conf), например здесь /home/ваш ник/документы/ (и здесь наш новый horg.conf)
Затем копируем в него конфигурацию
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "dri2"
Load "extmod"
Load "dbe"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "NoDDC"
HorizSync 30.0 - 79.0
VertRefresh 50.0 - 70
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "slow_edodram" # [<bool>]
#Option "slow_dram" # [<bool>]
#Option "fast_dram" # [<bool>]
#Option "fpm_vram" # [<bool>]
#Option "pci_burst" # [<bool>]
#Option "fifo_conservative" # [<bool>]
#Option "fifo_moderate" # [<bool>]
#Option "fifo_aggressive" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "early_ras_precharge" # [<bool>]
#Option "late_ras_precharge" # [<bool>]
#Option "lcd_center" # [<bool>]
#Option "set_lcdclk" # <i>
#Option "set_mclk" # <freq>
#Option "set_refclk" # <freq>
#Option "show_cache" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "mxcr3afix" # [<bool>]
#Option "XVideo" # [<bool>]
Identifier "Card0"
Driver "s3virge"
VendorName "S3 Inc."
BoardName "ViRGE/MX"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Затем перегружаем систему...
При старте появляется выборка (загрузчик) - здесь выбираем режим восстановления.
Загружаемся... появляется меню в котором нужно выбрать самый последний пункт (консоль для root)
На запрос логина и пароля пишем - root root .......... и вот мы в консоли...
Набираем MC (аналог Norton Commander под windows) Теперь у нас загрузился файловый менеджер, при помощи которого для новичка значительно удобнее выполнять - копирование\перенос\переименование и т д нежели при помощи команд.
Копирование по кнопке F5 из одной панельки в другую, где в каждой панели должен быть выбран нужный путь по диску.
Теперь мы копируем созданный нами файл xorg.conf из (/home/ваш ник/документы/xorg.conf ) в (/etc/X11/xorg.conf)
Перегружаемся, радуемся...
Зто решение для ноутбука Armada 7400 с видео картой S3 ViRGE MX/MX+
Для других компьютеров и конфигураций но с такой же видео картой (S3 ViRGE MX/MX+) достаточно будет прописать в xorg.conf
Section "Monitor"
Identifier "Monitor0"
Option "NoDDC"
HorizSync 30.0 - 79.0
VertRefresh 50.0 - 70
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
EndSection
Проверьте наличие драйвер ls /usr/lib/xorg/modules/drivers/s3virge_drv.so (есть ли файл s3virge_drv.so - по указанному пути)
Если его нет, то
sudo apt-get install xserver-xorg-video-s3virge
Должно помочь.
Надеюсь эта информация поможет обладателям
S3 ViRGE MX/MX+