Автор Тема: Не устанавливается Runtu XFCE 12.04 - 201207  (Прочитано 8009 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн Glad-58

  • Постоялец
  • ***
  • Автор темы
  • Сообщений: 151
"Неудачи преследуют меня..." (Каверин "Два капитана"). Так и не устанавливается на основной ПК (грешу на видеокарту GeForce 550Ti), и на неттоп ( http://samara.dns-shop.ru/catalog/i131407/kompyuter-dns-porto.html#opinion ), вот тут уж не знаю почему. В лайве всё работает, но после установки - чёрный экран.
Dell Vostro 1015 - Runtu Lite 14.04
Pentium 2120@Asrock H61-DGS/4gb RAM/GTX 650/1Tb WD -Runtu 14.04 XFCE

Оффлайн calambus

  • Местный
  • *****
  • Сообщений: 1433
  • calambus@jabber.ru
Не устанавливается Runtu XFCE 12.04 - 201207
« Ответ #1 : Июль 29, 2012, 16:14:34 »
Glad-58 , а этот аппарат подобен этому случаю ...
опыт увеличивается пропорционально количеству выведенных из строя Систем и оборудования...
Руководство по добавлению изображений на Форум

Оффлайн Glad-58

  • Постоялец
  • ***
  • Автор темы
  • Сообщений: 151
Не устанавливается Runtu XFCE 12.04 - 201207
« Ответ #2 : Июль 29, 2012, 16:41:14 »
Glad-58 , а этот аппарат подобен этому случаю ...
Нет, не этот. И на неттопе у меня 10.04 прекрасно себя чувствует. Это так, про между прочим про сказки о железе. Основоной комп - проц Е5300, мать GA-G41-S2PT (как-то так), планка 2048 Мб ОЗУ ДДР3, хард на 1Тб, 500 Гб и 160 Гб, карта из серии жирафа 550Ti, с 1024 мб GDDR5. 10.04 крутится прекрасно, а Runtu XFCE 12.04 - ну никак. Если кто-то скажет, что железо необычное - покажет себя полным лузером, уж не обижайтесь.
А вывод dmesg от неттопа - вот он, под спойлером:
[    0.392300] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xdfffffff] (subtractive decode)
[    0.392309] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    0.392339] pci_bus 0000:00: on NUMA node 0
[    0.392355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.392632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.392794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.392923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.393034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.393176]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.410766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.410934] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.411090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.411240] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.411390] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.411544] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.411710] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.411866] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.412193] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.412221] vgaarb: loaded
[    0.412840] SCSI subsystem initialized
[    0.412979] libata version 3.00 loaded.
[    0.413119] usbcore: registered new interface driver usbfs
[    0.413159] usbcore: registered new interface driver hub
[    0.413230] usbcore: registered new device driver usb
[    0.413553] wmi: Mapper loaded
[    0.413559] PCI: Using ACPI for IRQ routing
[    0.413570] PCI: pci_cache_line_size set to 64 bytes
[    0.413682] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.413690] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[    0.413698] reserve RAM buffer: 000000007f6a0000 - 000000007fffffff
[    0.413989] NetLabel: Initializing
[    0.413995] NetLabel:  domain hash size = 128
[    0.414000] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.414027] NetLabel:  unlabeled traffic allowed by default
[    0.414142] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.414153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.414167] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.428094] Switching to clocksource hpet
[    0.430988] Switched to NOHz mode on CPU #0
[    0.431039] Switched to NOHz mode on CPU #1
[    0.431070] Switched to NOHz mode on CPU #2
[    0.431093] Switched to NOHz mode on CPU #3
[    0.448804] AppArmor: AppArmor Filesystem Enabled
[    0.448870] pnp: PnP ACPI init
[    0.448924] ACPI: bus type pnp registered
[    0.449244] pnp 00:00: [bus 00-ff]
[    0.449253] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.449261] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.449269] pnp 00:00: [io  0x0d00-0xffff window]
[    0.449277] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.449285] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.449293] pnp 00:00: [mem 0x7f700000-0xdfffffff window]
[    0.449301] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.449435] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.449468] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.449476] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.449602] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.449613] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.449624] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.449724] pnp 00:02: [dma 4]
[    0.449732] pnp 00:02: [io  0x0000-0x000f]
[    0.449739] pnp 00:02: [io  0x0081-0x0083]
[    0.449746] pnp 00:02: [io  0x0087]
[    0.449752] pnp 00:02: [io  0x0089-0x008b]
[    0.449759] pnp 00:02: [io  0x008f]
[    0.449765] pnp 00:02: [io  0x00c0-0x00df]
[    0.449850] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.449888] pnp 00:03: [io  0x0070-0x0071]
[    0.449908] pnp 00:03: [irq 8]
[    0.449996] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.450144] pnp 00:04: [io  0x0061]
[    0.450228] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.450265] pnp 00:05: [io  0x00f0-0x00ff]
[    0.450280] pnp 00:05: [irq 13]
[    0.450368] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.450867] pnp 00:06: [io  0x0000-0xffffffff disabled]
[    0.450876] pnp 00:06: [io  0x0a00-0x0a0f]
[    0.450884] pnp 00:06: [io  0x0a10-0x0a1f]
[    0.450890] pnp 00:06: [io  0x0a20-0x0a2f]
[    0.450897] pnp 00:06: [io  0x0a30-0x0a3f]
[    0.451038] system 00:06: [io  0x0a00-0x0a0f] has been reserved
[    0.451048] system 00:06: [io  0x0a10-0x0a1f] has been reserved
[    0.451056] system 00:06: [io  0x0a20-0x0a2f] has been reserved
[    0.451065] system 00:06: [io  0x0a30-0x0a3f] has been reserved
[    0.451076] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.451343] pnp 00:07: [io  0x0010-0x001f]
[    0.451352] pnp 00:07: [io  0x0022-0x003f]
[    0.451360] pnp 00:07: [io  0x0044-0x005f]
[    0.451367] pnp 00:07: [io  0x0062-0x0063]
[    0.451374] pnp 00:07: [io  0x0065-0x006f]
[    0.451380] pnp 00:07: [io  0x0072-0x007f]
[    0.451387] pnp 00:07: [io  0x0080]
[    0.451394] pnp 00:07: [io  0x0084-0x0086]
[    0.451400] pnp 00:07: [io  0x0088]
[    0.451407] pnp 00:07: [io  0x008c-0x008e]
[    0.451414] pnp 00:07: [io  0x0090-0x009f]
[    0.451421] pnp 00:07: [io  0x00a2-0x00bf]
[    0.451428] pnp 00:07: [io  0x00e0-0x00ef]
[    0.451435] pnp 00:07: [io  0x04d0-0x04d1]
[    0.451441] pnp 00:07: [io  0x0800-0x087f]
[    0.451449] pnp 00:07: [io  0x0000-0xffffffff disabled]
[    0.451456] pnp 00:07: [io  0x0480-0x04bf]
[    0.451464] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    0.451471] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[    0.451641] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.451651] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.451660] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.451670] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.451680] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.451691] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.451887] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    0.451979] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.452323] pnp 00:09: [io  0x0060]
[    0.452332] pnp 00:09: [io  0x0064]
[    0.452339] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.452347] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.452502] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.452513] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.452524] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.452639] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.452766] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.452777] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.453315] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[    0.453325] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[    0.453333] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[    0.453340] pnp 00:0b: [mem 0x00100000-0x7f6fffff]
[    0.453348] pnp 00:0b: [mem 0xfed90000-0xffffffff]
[    0.453510] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.453520] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.453530] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.453540] system 00:0b: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.453549] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.453560] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.453993] pnp: PnP ACPI: found 12 devices
[    0.454000] ACPI: ACPI bus type pnp unregistered
[    0.454008] PnPBIOS: Disabled by ACPI PNP
[    0.494700] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.494716] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.494727] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80400000-0x805fffff]
[    0.494739] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.494751] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80800000-0x80bfffff]
[    0.494762] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.494773] pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
[    0.494781] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.494790] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.494801] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.494812] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.494824] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.494833] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.494844] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff]
[    0.494854] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.494867] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.494876] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.494887] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x80bfffff]
[    0.494899] pci 0000:00:1c.3:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.494912] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[    0.494919] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.494929] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.494939] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.494963] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.494999] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.495011] pci 0000:00:1c.0: setting latency timer to 64
[    0.495025] pci 0000:00:1c.2: enabling device (0104 -> 0107)
[    0.495047] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.495057] pci 0000:00:1c.2: setting latency timer to 64
[    0.495084] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.495094] pci 0000:00:1c.3: setting latency timer to 64
[    0.495108] pci 0000:00:1e.0: setting latency timer to 64
[    0.495119] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.495127] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.495135] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.495143] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.495151] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xdfffffff]
[    0.495160] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.495168] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.495176] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[    0.495185] pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.495193] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.495201] pci_bus 0000:03: resource 1 [mem 0x80400000-0x805fffff]
[    0.495210] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.495218] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.495226] pci_bus 0000:02: resource 1 [mem 0x80800000-0x80bfffff]
[    0.495235] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.495243] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.495251] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.495259] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.495267] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.495276] pci_bus 0000:01: resource 8 [mem 0x7f700000-0xdfffffff]
[    0.495284] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.495396] NET: Registered protocol family 2
[    0.495588] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.496214] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.497250] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.497771] TCP: Hash tables configured (established 131072 bind 65536)
[    0.497779] TCP reno registered
[    0.497793] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.497815] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.498124] NET: Registered protocol family 1
[    0.498168] pci 0000:00:02.0: Boot video device
[    0.498318] PCI: CLS 32 bytes, default 64
[    0.499121] cpufreq-nforce2: No nForce2 chipset.
[    0.499498] audit: initializing netlink socket (disabled)
[    0.499521] type=2000 audit(1343564725.492:1): initialized
[    0.523654] highmem bounce pool size: 64 pages
[    0.523670] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.529514] VFS: Disk quotas dquot_6.5.2
[    0.529713] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.531953] fuse init (API version 7.16)
[    0.532317] msgmni has been set to 1686
[    0.533080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.533176] io scheduler noop registered
[    0.533183] io scheduler deadline registered
[    0.533243] io scheduler cfq registered (default)
[    0.533517] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.533583] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.533704] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.533763] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[    0.533889] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.533948] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.534154] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.534228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.534398] intel_idle: MWAIT substates: 0x10
[    0.534417] intel_idle: v0.4 model 0x1C
[    0.534422] intel_idle: lapic_timer_reliable_states 0x2
[    0.534771] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.534786] ACPI: Power Button [PWRB]
[    0.534935] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.534946] ACPI: Power Button [PWRF]
[    0.535337] ACPI: acpi_idle yielding to intel_idle
[    0.538878] ERST: Table is not found!
[    0.539068] isapnp: Scanning for PnP cards...
[    0.539095] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.773950] Freeing initrd memory: 8436k freed
[    0.892139] isapnp: No Plug & Play device found
[    0.900340] Linux agpgart interface v0.103
[    0.900505] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    0.900652] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.900884] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.901114] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.904161] brd: module loaded
[    0.905652] loop: module loaded
[    0.905890] i2c-core: driver [adp5520] using legacy suspend method
[    0.905895] i2c-core: driver [adp5520] using legacy resume method
[    0.906989] Fixed MDIO Bus: probed
[    0.907088] PPP generic driver version 2.4.2
[    0.907191] tun: Universal TUN/TAP device driver, 1.6
[    0.907196] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.907397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.907458] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.907488] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.907495] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.907602] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.907705] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.907720] ehci_hcd 0000:00:1d.7: debug port 1
[    0.911607] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.911638] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
[    0.924024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.924296] hub 1-0:1.0: USB hub found
[    0.924306] hub 1-0:1.0: 8 ports detected
[    0.924466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.924500] uhci_hcd: USB Universal Host Controller Interface driver
[    0.924568] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.924581] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.924587] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.924686] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.924769] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
[    0.925069] hub 2-0:1.0: USB hub found
[    0.925080] hub 2-0:1.0: 2 ports detected
[    0.925209] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.925222] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.925228] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.925325] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.925417] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[    0.925698] hub 3-0:1.0: USB hub found
[    0.925707] hub 3-0:1.0: 2 ports detected
[    0.925839] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.925851] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.925857] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.925945] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.928089] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[    0.928400] hub 4-0:1.0: USB hub found
[    0.928410] hub 4-0:1.0: 2 ports detected
[    0.928550] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.928563] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.928569] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.928666] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.928759] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d080
[    0.929043] hub 5-0:1.0: USB hub found
[    0.929053] hub 5-0:1.0: 2 ports detected
[    0.929288] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.929774] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.929793] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.930164] mousedev: PS/2 mouse device common for all mice
[    0.930475] rtc_cmos 00:03: RTC can wake from S4
[    0.948129] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.948164] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.948386] device-mapper: uevent: version 1.0.3
[    0.948594] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.948781] device-mapper: multipath: version 1.2.0 loaded
[    0.948787] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.948980] EISA: Probing bus 0 at eisa.0
[    0.948985] EISA: Cannot allocate resource for mainboard
[    0.948991] Cannot allocate resource for EISA slot 1
[    0.948996] Cannot allocate resource for EISA slot 2
[    0.949001] Cannot allocate resource for EISA slot 3
[    0.949006] Cannot allocate resource for EISA slot 4
[    0.949011] Cannot allocate resource for EISA slot 5
[    0.949016] Cannot allocate resource for EISA slot 6
[    0.949021] Cannot allocate resource for EISA slot 7
[    0.949026] Cannot allocate resource for EISA slot 8
[    0.949030] EISA: Detected 0 cards.
[    0.949317] cpuidle: using governor ladder
[    0.949572] cpuidle: using governor menu
[    0.950173] TCP cubic registered
[    0.950497] NET: Registered protocol family 10
[    0.951708] NET: Registered protocol family 17
[    0.951755] Registering the dns_resolver key type
[    0.951871] Using IPI No-Shortcut mode
[    0.952169] PM: Hibernation image not present or could not be loaded.
[    0.952192] registered taskstats version 1
[    0.952569]   Magic number: 4:831:431
[    0.952689] rtc_cmos 00:03: setting system clock to 2012-07-29 12:25:26 UTC (1343564726)
[    0.952695] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.952699] EDD information not available.
[    0.952922] Freeing unused kernel memory: 724k freed
[    0.953345] Write protecting the kernel text: 5180k
[    0.953425] Write protecting the kernel read-only data: 2144k
[    0.987648] udev: starting version 151
[    0.987796] udevd (71): /proc/71/oom_adj is deprecated, please use /proc/71/oom_score_adj instead.
[    1.098996] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.099055] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.099119] r8169 0000:02:00.0: setting latency timer to 64
[    1.099133] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[    1.099222] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    1.106658] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf801a000, e0:69:95:3e:79:07, XID 0c200000 IRQ 43
[    1.113873] ahci 0000:00:1f.2: version 3.0
[    1.113905] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.114000] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.114121] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    1.114132] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.114144] ahci 0000:00:1f.2: setting latency timer to 64
[    1.116081] scsi0 : ahci
[    1.116596] scsi1 : ahci
[    1.117095] scsi2 : ahci
[    1.117599] scsi3 : ahci
[    1.117906] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 44
[    1.117913] ata2: DUMMY
[    1.117916] ata3: DUMMY
[    1.117919] ata4: DUMMY
[    1.236033] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.436040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.471391] ata1.00: ATA-8: WDC WD1600BEVT-00A23T0, 01.01A01, max UDMA/133
[    1.471400] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.472638] ata1.00: configured for UDMA/133
[    1.472897] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-0 01.0 PQ: 0 ANSI: 5
[    1.473462] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.473481] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.473709] sd 0:0:0:0: [sda] Write Protect is off
[    1.473720] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.473824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.480039] usb 1-5: new high speed USB device using ehci_hcd and address 3
[    1.496033] Refined TSC clocksource calibration: 1795.499 MHz.
[    1.496042] Switching to clocksource tsc
[    1.521409]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.522470] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.612956] hub 1-5:1.0: USB hub found
[    1.613089] hub 1-5:1.0: 4 ports detected
[    1.908039] usb 4-2: new low speed USB device using uhci_hcd and address 2
[    2.049915] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.164229] usb 1-5.3: new full speed USB device using ehci_hcd and address 5
[    2.328113] usb 1-5.4: new high speed USB device using ehci_hcd and address 6
[    9.237668] Adding 2440188k swap on /dev/sda5.  Priority:-1 extents:1 across:2440188k
[    9.271982] udev: starting version 151
[    9.438541] type=1400 audit(1343564734.979:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=328 comm="apparmor_parser"
[    9.439290] type=1400 audit(1343564734.979:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
[    9.439742] type=1400 audit(1343564734.979:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
[    9.548740] lp: driver loaded but no devices found
[    9.739160] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[    9.751402] r8712u: DriverVersion: v7_0.20100831
[    9.751448] r8712u: register rtl8712_netdev_ops to netdev_ops
[    9.751457] r8712u: USB_SPEED_HIGH with 4 endpoints
[    9.752244] r8712u: Boot from EFUSE: Autoload OK
[    9.773757] Linux video capture interface: v2.00
[    9.821963] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[    9.826315] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.0/input/input2
[    9.827558] usbcore: registered new interface driver uvcvideo
[    9.827569] USB Video Class driver (v1.0.0)
[    9.920439] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
[    9.920800] generic-usb 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.2-2/input0
[    9.940209] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input4
[    9.941425] generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.2-2/input1
[    9.972543] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.3/1-5.3:1.0/input/input5
[    9.977899] generic-usb 0003:09DA:055F.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.7-5.3/input0
[    9.980896] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.3/1-5.3:1.1/input/input6
[    9.981604] generic-usb 0003:09DA:055F.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.7-5.3/input1
[    9.981670] usbcore: registered new interface driver usbhid
[    9.981677] usbhid: USB HID core driver
[   10.167273] [drm] Initialized drm 1.1.0 20060810
[   10.276471] r8712u: CustomerID = 0x0000
[   10.276479] r8712u: MAC Address from efuse = 48:5d:60:41:b5:d0
[   10.278017] usbcore: registered new interface driver r8712u
[   10.347071] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.347082] i915 0000:00:02.0: setting latency timer to 64
[   10.383869] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[   10.383884] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.383890] [drm] Driver supports precise vblank timestamp query.
[   10.452309] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.452690] [drm] initialized overlay support
[   10.622602] fbcon: inteldrmfb (fb0) is primary device
[   10.768750] fixme: max PWM is zero.
[   10.778100] Console: switching to colour frame buffer device 128x48
[   10.787030] fb0: inteldrmfb frame buffer device
[   10.787035] drm: registered panic notifier
[   10.787056] No ACPI video bus found
[   10.787466] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.787565] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.787688] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   10.787743] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.989021] hda_codec: ALC662 rev1: BIOS auto-probing.
[   10.998840] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.236367] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.781471] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.344485] EXT3-fs: barriers not enabled
[   13.344758] kjournald starting.  Commit interval 5 seconds
[   13.345199] EXT3-fs (sda7): using internal journal
[   13.345209] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   13.470927] type=1400 audit(1343564739.011:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=668 comm="apparmor_parser"
[   13.483312] type=1400 audit(1343564739.023:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=673 comm="apparmor_parser"
[   13.484149] type=1400 audit(1343564739.027:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=673 comm="apparmor_parser"
[   13.492806] type=1400 audit(1343564739.035:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=669 comm="apparmor_parser"
[   13.493588] type=1400 audit(1343564739.035:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=669 comm="apparmor_parser"
[   13.494066] type=1400 audit(1343564739.035:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=669 comm="apparmor_parser"
[   13.500782] type=1400 audit(1343564739.043:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=674 comm="apparmor_parser"
[   13.573118] r8169 0000:02:00.0: eth0: link down
[   13.575108] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.296502] r8712u: 1 RCR=0x153f00e
[   14.297227] r8712u: 2 RCR=0x553f00e
[   14.404848] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.616795] ppdev: user-space parallel port driver
[   30.105794] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   40.464015] wlan0: no IPv6 routers present
glad777@glad777-desktop:~$

Ка видите - НИЧЕГО необычного. MD5 образов проверял, но.... :-\
Dell Vostro 1015 - Runtu Lite 14.04
Pentium 2120@Asrock H61-DGS/4gb RAM/GTX 650/1Tb WD -Runtu 14.04 XFCE

Оффлайн HsH

  • Administrator
  • *****
  • Сообщений: 3465
Re: Не устанавливается Runtu XFCE 12.04 - 201207
« Ответ #3 : Июль 31, 2012, 10:21:08 »
В лайве всё работает, но после установки - чёрный экран.

   После этого есть возможность перейти в консоли 1-6 (Ctrl+Alt+F1..F6) и залогиниться?

   Попробуйте запустить систему без параметров "splash quiet" в строке загрузки ядра меню GRUB, посмотрите, на чём останавливается загрузка.